fbpx Skip to content

6 Section 6: Vertical Stabilizer

Misc. updates and changes

06_10

    Changelog

  • 10/05/2021

    KAI Page 06-03 REV 3:

    • Added instruction to Step 1 to radius corners of ribs to prevent skin damage.
  • 11/05/2020

    KAI Page 6-1 REV 2:

    • Replaced depiction and call-out of VS-1010 Bottom Rudder Hinge Bracket and R-1007B Rudder Stop with updated configuration; VS-01010-1 and R-01007B-1.

    KAI Page 6-2 REV 2:

    • In Figure 2, replaced depiction and call-out of VS-1010 with VS-01010-1.
    • In Step 2, “… drilled in Step 6)” was “… drilled in Step 5).”
    • In all relevant steps, replaced VS-1010 with VS-01010-1.
    • Step 4: Removed the bottom hinge bracket from items to be final-drilled.
    • Re-numbered Steps 5 and 6 to Steps 6 and 7.
    • Inserted new Step 5 with instructions to final-drill the VS-01010-1 holes.
    • Step 7 (originally Step 6): Rearranged sentence structure and added instructions (and call-out to Figure 2) not to machine countersink the holes directly above the VS-01010-1.
    • Inserted new Step 8 with instructions to machine countersink #19 the holes for the VS-01010-1.

    KAI Page 6-3 REV 2:

    • In Figure 1, removed the VS-1003 call-out and added “REAR SPAR ASSEMBLY” call-out.
    • In Figure 2, removed depiction of bottom hinge brackets.
    • Step 9: ‘… the top and middle rudder hinge brackets…” was “… the rudder hinge brackets…”
    • Step 11: Removed reference to the VS-1010.

    KAI Page 6-4 REV 1:

    • Deleted Figures 2 and 3, and Steps 3, 4, and 6 (all related to the VS-1010 Bottom Rudder Hinge Brackets and R-1007 Rudder Stop).
    • Step 5 changed to Step 3. Replaced VS-1010 with VS-01010-1.
    • Added new Step 4 for riveting the VS-1015 Front Spar Doubler and added rivet call-outs to Figure 1 (information removed from Page 6-5).
    • New Step 5 and Figure 2 (riveting the VS-1017 Hinge Doubler and VS-1012 Top Rudder Hinge Brackets to the VS-1003 Front Spar) moved from Page 6-5 to this page.
    • Step 7 changed to Step 6. Replaced VS-1010 with VS-01010-1.
    • Figure 4 changed to Figure 3. Removed rivet call-outs for, and depiction of, the VS-1010 Bottom Rudder Hinge Brackets. Added call-out for the bottom rudder hinge bracket holes.

    KAI Page 6-5 REV 2:

    • Information contained in Steps 1 and 2 and Figures 1 and 2 moved to previous page.
    • Step 3 changed to Step 1.
    • Figure 3 changed to Figure1. In figure, changed VS-1003 call-out to “REAR SPAR ASSEMBLY.”
    • Added new Step 2 with instructions to clean powder coat form #12 holes.
    • Added new Step 3 with instructions to deburr and install the R-01007B-1 Rudder Stops.
    • Added new Figure 2 depicting installation of VS-01010-1 Bottom Rudder Hinge Bracket.

    KAI Page 6-6 REV 1:

    • In Step 7, “Page 6-5, Figure 1” was “Page 6-5 Figure 3.”
    • Added Step 10 with instructions to attach the VS-01010-1 Bottom Rudder Hinge Bracket.

Would you like to try our new online store?